| Customization: | Available |
|---|---|
| Output Type: | AC Three Phase |
| Number of Blade: | Multiple-Blade |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical data | |
| Model | 500kw-90rpm |
| Rated Power(w) | 500kw |
| Max Power(w) | 550kw |
| Rated Voltage(v) | 400v |
| Rated rotated speed(r/m) | 90r/m |
| Output Current | AC |
| Rated Torque(N*M): | 53055.5Nm |
| generator | 3 phase permanent magnet synchronous generator |
| Insulation Class: | F |
| Service Life: | More Than 20 years |
| Bearing | HRB or for your order |
| Shaft Material | Iron |
| Shell Material | Carbon Steel |
| Permanent Magnet Material | Rare Earth NdFeB |
| Protection Grade | IP54 |
| Lubrication | Lubrication Grease |
| Model | SHJ-NEG500K |
| Isolation | Low frequency transformer isolation |
| Circuit principle | IGBT/PWM pulse width modulation method |
| Function | Rectifier ,control , dump load , inverter |
| Nominal AC input voltage | 400Vac |
| AC input voltage range | 300Vac-550Vac |
| PWM constant voltage | ≥650Vdc |
| Wind turbine 3-phase dump load voltage | 700Vdc±5Vdc |
| AC output power | 500KW |
| THD of AC current | <3%(Rated power) |
| Power factor | >0.99 |
| Max. efficiency | 94% |
| Output rating voltage | 220Vac /60Hz |
| Allowed Grid Voltage Range | 180~265Vac |
| Allowed Grid Frequency Range | 58.5~61.5Hz |
| Internal power consumption an night | <100W |
| Automatically put into operation conditions | DC input and power to meet the requirements, the inverter automatically run |
| Automatic restart after power failure time | 2min (can set) |
| Protection | Reverse polarity, short circuit, island, overheating and overload etc |
| Display mode | Touch screen |
| The generator power curve | can set |
| Comm. Interfaces | Ethernet/RS485 |
| Operating Temp. | -20ºC~+55ºC |
| Relative humidity | 0~90%,Non-condensing |
| Altitude(m) | 5000 meters (over 2000 m with derating required) |
| Cooling method | Forced air cooling |
| Noise | ≤60dB |
| Protection degree | IP20(indoor) |
| Size(W*L*H) | 2000*1200*2060mm+800*600*2060mm( dump load) (the size is only for reference, please make the object as the standard) |
){kind=link}